 |
 |
BUY now
Farmnavigator Auto-Steering System
7930 €
Farmnavigator Customer Support
 |
|
 |
User Manuals |
 |
FAQ |
|
|
WarrantyAvMap GPS are guaranteed for 2 years after the purchase date. |
EIMA 2014
AvMap at EIMA 2014
INTERNATIONAL AGRICULTURAL AND GARDENING MACHINERY EXHIBITION
12th -16th November, Bologna
Vist us at HALL 20 Booth D70
Read the Press Release
Farmnavigator Auto-Steering System
Combine the G7 Farmnavigator 7” guidance display with a reliable and cost effective
auto-steering kit for precision farming that increases work accuracy, saves fuel, and reduces operator stress and fatigue. The system consists in:
 |
 |
 |
|
G7 Farmnavigator |
Smart DGPS antenna |
Farmnavigator C-Box |
 |
|
|
|
Farmnavigator ECU |
Farmnavigator MDU |
MDU: easy installation and transfer
The MDU mounts on existing steering wheel without requiring its removal thanks to the Patented universal ring gear. The MDU simply clamps on and off for fast and easy transfer across vehicles of different brands and types (tractors, sprayers, spreaders or combines).
• High torque gear for the most demanding vehicles
• High speed response to quickly get the vehicle on-line
• WAAS / EGNOS level pass to pass accuracy
ECU: the compact and versatile steering controller
It houses the compass, gyro and accelerometers used to detect orientation and movement of vehicle. It receives corrected GPS data from the external receiver, andconverts information from the Farmnavigator to actual steering commands.
• Compatible with any GNSS smart antenna. It supports GPS, Glonass, Galileo and Beidou constellations
• Centimeter level accuracy when used with an RTK correction signal
• Supports all vehicle interface types: Mechanical, ISO/CAN, Hydraulic and Factory steer ready.
• Custom install kits are available from Novariant to simplify installation for over 750 models of agricultural machines.
• 9-axis inertial sensor to provide enhanced terrain compensation
• Programming and maintenance over WiFi
• Automatic setup and calibration
 |
 |
Compatible with Automatic Section Control ExtensionCombine the Auto-Steering System with the Farmnavigator Automatic Section Control extension to optimize your work! |
The Automatic Section Control is obtained connecting G7 Farmnavigator to a compatible controller through ethernet cable. G7 Farmnavigator calculates the exact treated area and controls automatically the boom sections (based on the position received by the DGPS antenna) in order to avoid treatment overlaps and risk of crop injuries.
Installation
The smart antenna connects to G7 Famnavigator via serial cable. The G7 Farmnavigator connects
to the ECU through the C-Box and Ethernet Cable.
Setup Wizard
Easily configure the ECU following the step-by-step wizard on the G7 Farmnavigator display.
Technical Specifications
Farmnavigator ECU
• Operating Temperature -20° C to 60° C
• Storage Temperature -40° C to 85° C
• Humidity 95% non-condensing
• Enclosure IP-67
• Certifications. FCC, Industry Canada, RoHS, CE, C-Tick
• Input Voltage 9-16 VDC
• Quiescent Current Draw <10mA 0.01 A Typical
• LED indicators
• Dimensions 153 mm x 147 mm x 57 mm
• Weight <1kg
• Connectors: 18-pin Male (power, display & GPS), 30-pin Male (for vehicle interface)
• Ethernet connection to display
• CAN Ports to Connect to ISOBUS Steering controller
• Wheel Angle Sensor input
• Pressure transducer input
• 9-axis inertial sensors to provide enhanced terrain compensation
• RTK compatible ( connecting RTK antenna directly to ECU)
• Included connection cables: cable harness (ethernet, power, NMEA-A, NMEA-B, Expansion, CAN); ECU-MDU cable.
BUY Now
|
 |
|
Farmnavigator Auto-Steering System 7930 € |
Auto-SteeringKit 6100 € |
 |
Navegadores Terrestres: |
|
G7 Farmnavigator series
|
G6 Farmnavigator series
|